Viking Platinum 16 Guida Utente Scaricare il pdf (Pagina 13)

Page 13

Setting Up the Table (and Taking

it Down for Storage)

Check that the On/Off switch (page 12, Figure 3, #21)

is turned off (the 0 setting). Plug the power cord into

the power outlet on the back of the machine (Figure 4).

Do not plug the power cord into a power source at this

time.

Installing the Power Cord

1. Plug in the foot pedal cord end into the foot pedal

connector (see page 12, Figure 3, #23).

2. Place the foot pedal under the table where operator

can reach it from the front of the machine.

The PLATINUM™ 16 quilting machine table has been

designed to accommodate the PLATINUM™ 16 quilting

machine. It has folding legs that are height-adjustable

and is heavy enough to provide stabilization for quilting

at high speeds.

1. Open the box and gently remove the table, taking

care not to drop the table on the ﬂoor. The table weighs

nearly 50 pounds, so it is recommended that you ask

someone to help.

2. Remove the bracer.

3.Unfold the legs, pulling on the horizontal braces until

the legs snap into place. Set the table upright.

4. Make the table taller by pinching the two height-

adjustment tabs on each set of legs and lifting on table,

while holding legs down with foot. Make the table

shorter by pinching the same tabs and pushing down

on the table.

5. To store the table, remove machine and return legs to

their lowest position.

6. The legs are attached to the table top with brackets

of two different sizes. One is longer than the other.

Identify the long and the short leg brackets.

7. Fold in the short bracket leg ﬁrst. Push on the

horizontal braces to loosen the legs and push them

back toward the table top.

8. Repeat with the long bracket leg.

Installing the Foot Pedal

Placing the Machine in the Table

1. We recommend having someone help lift and place

the machine.

2. Lift the machine by putting one arm through the

throat space.

3. Guide the machine from the back of the table into

the slot. Machine is positioned correctly when the back

of the machine is ﬂush with the back of the table.

Figure 4

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 33 34

Commenti su questo manuale

Nessun commento

Viking Platinum 16 Guida Utente Pagina 13

Commenti su questo manuale

Prodotti e manuali riguardandi Macchine da cucire Viking Platinum 16